Alan Cook Alan Cook's Profile Page

Alan Cook Alan Cook

0 Course Enrolled • 0 Course Completed

Biography

NSE7_SDW-7.2 Study Test & NSE7_SDW-7.2 Pdf Files

BONUS!!! Download part of TrainingDump NSE7_SDW-7.2 dumps for free: https://drive.google.com/open?id=1btlcdKOV3rbJxddvJL12h8RgkT4hPSXX

Fortinet NSE7_SDW-7.2 certification exam is very important for every IT person. With this certification you will not be eliminated, and you will be a raise. Some people say that to pass the Fortinet NSE7_SDW-7.2 exam certification is tantamount to success. Yes, this is true. You get what you want is one of the manifestations of success. TrainingDump of Fortinet NSE7_SDW-7.2 Exam Materials is the source of your success. With this training materials, you will speed up the pace of success, and you will be more confident.

As a top selling product in the market, our NSE7_SDW-7.2 study guide has many fans. They are keen to try our newest version products even if they have passed the NSE7_SDW-7.2 exam. They never give up learning new things. Every time they try our new version of the NSE7_SDW-7.2 Real Exam, they will write down their feelings and guidance. Also, they will exchange ideas with other customers. And in such a way, we can develop our NSE7_SDW-7.2 practice engine to the best according to their requirements.

>> NSE7_SDW-7.2 Study Test <<

Fortinet NSE7_SDW-7.2 preparation labs - Pass4sure NSE7_SDW-7.2 exam cram

The time for NSE7_SDW-7.2 test certification is approaching. If you do not prepare well for the Fortinet certification, please choose our NSE7_SDW-7.2 exam test engine. You just need to spend 20-30 hours for study and preparation, then confident to attend the actual test. If you have any question about NSE7_SDW-7.2 study pdf, please contact us at any time. The online chat button is at the right bottom of the TrainingDump page. Besides, we guarantee money refund policy in case of failure.

Fortinet NSE7_SDW-7.2 Exam Syllabus Topics:

Topic
Details

Topic 1

Centralized Management: This area focuses on deploying and managing SD-WAN through FortiManager, including using IPsec templates and SD-WAN Overlay Templates. Mastery here demonstrates the abilities of Fortinet network and security professionals to streamline SD-WAN configuration, enhance security, and maintain consistent policies across multiple sites.

Topic 2

SD-WAN Configuration: This topic assesses skills of Fortinet network and security professionals in setting up basic SD-WAN environments, including configuring Direct Internet Access (DIA), SD-WAN Members, and Performance Service Level Agreements (SLAs). Proficiency here ensures the ability to design efficient and resilient SD-WAN configurations.

Topic 3

SD-WAN Troubleshooting: Troubleshooting SD-WAN issues, including rules, routing, and ADVPN, is vital for maintaining network reliability. This section of the Fortinet NSE 7 - SD-WAN 7.2 exam tests the ability to diagnose and resolve SD-WAN problems using diagnostic commands and monitoring tools, ensuring robust and uninterrupted network operations.

Topic 4

Rules and Routing: Understanding SD-WAN Rules and Routing is crucial for directing traffic effectively. This topic of the NSE7_SDW-7.2 Exam evaluates the capabilities of Fortinet network and security professionals to configure SD-WAN rules and routing.

Topic 5

SD-WAN Overlay Design and Best Practices: It focuses on the deployment of hub-and-spoke IPsec topologies and configuring ADVPN. Proficiency in this topic ensures that Fortinet network and security professionals can implement effective and reliable SD-WAN overlays tailored to organizational needs.

Fortinet NSE 7 - SD-WAN 7.2 Sample Questions (Q57-Q62):

NEW QUESTION # 57
Exhibit.

The exhibit shows the output of the command diagnose sys sdwan health-check status collected on a FortiGate device. Which two statements are correct about the health check status on this FortiGate device? (Choose two.)

A. The interface T_INET_0 missed three SLA targets.
B. The health-check VPN_PING orders the members according to the lowest jitter.
C. There is no SLA criteria configured for the health-check Level3_DNS.
D. The interface T_INET_1 missed one SLA target.

Answer: B,C

Explanation:
According to the FortiGate / FortiOS 6.4.2 Administration Guide, the health check status command displays the status of the health check probes for each SD-WAN member interface. The output includes the following information:
state: the current state of the interface, either alive or dead
packet-loss: the percentage of packets lost during the health check
latency: the average round-trip time in milliseconds
jitter: the variation in latency
mos: the mean opinion score, a measure of voice quality
bandwidth: the available bandwidth in kilobits per second for each direction (up, down, bi) sla map: a bitmap that indicates which SLA criteria are met or failed Based on the exhibit, the following statements are correct:
The health-check VPN_PING orders the members according to the lowest jitter. This means that the interface with the lowest jitter value is listed first, followed by the next lowest, and so on1. In the exhibit, the order is T_MPLS, T_INET_1, and T_INET_0.
There is no SLA criteria configured for the health-check Level3_DNS. This means that the health check does not use any SLA parameters to determine the state of the interface2. In the exhibit, the sla map value is 0x0 for both port1 and port2, indicating that no SLA criteria are applied.

NEW QUESTION # 58
Refer to the exhibit.

An administrator is troubleshooting SD-WAN on FortiGate. A device behind branch1_fgt generates traffic to the 10.0.0.0/8 network. The administrator expects the traffic to match SD-WAN rule ID 1 and be routed over T_INET_0_0. However, the traffic is routed over T_INET_1_0.
Based on the output shown in the exhibit, which two reasons can cause the observed behavior? (Choose two.)

A. The traffic matches a regular policy route configured with T_INET_1_0 as the outgoing device.
B. T_INET_1_0 has a higher member configuration priority than T_INET_0_0.
C. T_INET_1_0 has a lower route priority value (higher priority) than T_INET_0_0.
D. T_INET_0_0 does not have a valid route to the destination.

Answer: A,D

NEW QUESTION # 59
Refer to the exhibits.

Exhibit A shows the packet duplication rule configuration, the SD-WAN zone status output, and the sniffer output on FortiGate acting as the sender. Exhibit B shows the sniffer output on a FortiGate acting as the receiver.
The administrator configured packet duplication on both FortiGate devices. The sniffer output on the sender FortiGate shows that FortiGate forwards an ICMP echo request packet over three overlays, but it only receives one reply packet through T_INET_1_0.
Based on the output shown in the exhibits, which two reasons can cause the observed behavior? (Choose two.)

A. On the sender FortiGate, duplication-max-num is set to 3.
B. The ICMP echo request packets sent over T_INET_0_0 and T_MPLS_0 were dropped along the way.
C. On the receiver FortiGate, packet-de-duplication is enabled.
D. The ICMP echo request packets received over T_INET_0_0 and T_MPLS_0 were offloaded to NPU.

Answer: A,C

NEW QUESTION # 60
Which statement about using BGP for ADVPN is true?

A. You must configure BGP communities.
B. You must configure AS path prepending.
C. IBGP is preferred over EBGP,because IBGP preserves next hop information.
D. You must use BGP to route traffic for both overlay and underlay links.

Answer: C

Explanation:
Explanation
ADVPN is a technology that allows dynamic creation of IPsec tunnels between branch sites without requiring
pre-configured policies or keys. BGP is a routing protocol that can be used to exchange routes between
ADVPN peers. IBGP is a type of BGP that runs between routers in the same autonomous system (AS), while
EBGP is a type of BGP that runs between routers in different ASes. IBGP is preferred over EBGP for
ADVPN, because IBGP preserves the next hop information of the routes, which is needed to establish the
IPsec tunnels. EBGP changes the next hop information to the EBGP peer address, which may not be reachable
by the ADVPN peers. Therefore, using IBGP for ADVPN avoids the need to configure additional static routes
or redistribute routes between BGP and another routing protocol. References = ADVPN with BGP as the
routing protocol, ADVPN, SD-WAN self-healing with BGP, Technical Tip: ADVPN with BGP as the routing
protocol

NEW QUESTION # 61
Refer to the exhibit.

FortiGate has multiple dial-up VPN interfaces incoming on port1 that match only FIRST_VPN.
Which two configuration changes must be made to both IPsec VPN interfaces to allow incoming connections to match all possible IPsec dial-up interfaces? (Choose two.)

A. Use unique Diffie Hellman groups on each VPN interface.
B. Specify a unique peer ID for each dial-up VPN interface.
C. Configure the IKE mode to be aggressive mode.
D. Use different proposals are used between the interfaces.

Answer: B,C

NEW QUESTION # 62
......

Our NSE7_SDW-7.2 training guide has been well known in the market. Almost all candidates know our NSE7_SDW-7.2 exam questions as a powerful brand. Once their classmates or colleagues need to prepare an exam, they will soon introduce them to choose our NSE7_SDW-7.2 Study Materials. So our study materials are helpful to your preparation of the NSE7_SDW-7.2 exam. As a matter of fact, we receive thousands of the warm feedbacks to thank us for helping them pass the exam.

NSE7_SDW-7.2 Pdf Files: https://www.trainingdump.com/Fortinet/NSE7_SDW-7.2-practice-exam-dumps.html

2025 Latest TrainingDump NSE7_SDW-7.2 PDF Dumps and NSE7_SDW-7.2 Exam Engine Free Share: https://drive.google.com/open?id=1btlcdKOV3rbJxddvJL12h8RgkT4hPSXX

Alan Cook Alan Cook

Biography

Resources

Social Links